Study assembly and all parts. Model all part in SW, create assembly and assembly drawing with part drawing of Body, C.I.
Requirements:
1. Assembly – apply appropriate mates, no “Lock” mate should be used. Create exploded view, remember just one exploded view with steps should be on the model. Save assembly with number 2020677-101 and name Antivibration Mount. Don’t forget to create properties of assembly. Watch my video if you don’t remember
2. Drawing – use your Custom Drawing Template. On the drawing, page 1, show isometric exploded view of assembly, BOM-material, and balloons. On page 2 create drawing of: Yoke Plate part, show top view and front view as a full section, Bushing part, show front view only with broken-out section to specify wall thickness and internal diameter. Identify each of these parts with part number located underneath of the views. Save drawing with part number 2020677 and name Antivibration Mount.
3. Part-: Hex Bolt, Cotter Pin, Slotted Nut should be downloaded from McMaster-Carr, use numbers assigned by standard.
For Bushing use Revolve Feature, only one step/feature is required to model Bushing. Body C.I. and Yoke Plate design the way you want.
Assign material for each part, create properties for each part.
Yoke Plate part number: 2020677-1
Body C.I. part number: 2020677-2
Bushing part number: 2020677-3
Submit assembly and drawing for grading, using “Pack & Go”
Grading: AntiVibration Mount
AntiVibration MountCriteriaRatingsPts
This criterion is linked to a Learning OutcomeDrawing: page 1: ANSI standard, isometric exploded view, balloons, BOM-material, filled in title block. Page 2: show top view and front view as a full section of Yoke Plate part. Apply all necessary dimensions to fully describe this part 25 pts
This criterion is linked to a Learning OutcomeAssembly: all appropriate mates, exploded view 25 pts
This criterion is linked to a Learning OutcomeYoke Plate: fully defined sketches, ANSI standard 20 pts
This criterion is linked to a Learning OutcomeBody C.I.: fully defined sketches, ANSI standard 15 pts
This criterion is linked to a Learning OutcomeHex Bolt, Cotter Pin, Slotted Nut – use standard number to save these parts 10 pts
This criterion is linked to a Learning OutcomeBushing: use revolve feature and one step only, assign material, fully defined sketches, ANSI standard 5 pts
Testimonials
